Natural Gas and Oil Horizontal Drilling Technology Thesis

Natural Gas and Oil Horizontal Drilling Technology - Thesis Example As the discussion declares the increased popularity of horizontal drilling led to substantive growths in the achievable length of horizontal boreholes. Currently, horizontal displacements can extend to more than 8,000 feet. On the other hand, technicians have been unable to demonstrate the commercial feasibility of horizontal drilling and wells used in the production of natural gas, although several horizontal wells have previously been used in the production of coal seam gas. According to the report findings an accepted description of what constitutes horizontal drilling has not been written. However, the following is a notable definition that combines the vital components of two noteworthy published definitions: horizontal drilling refers to a process of drilling and implementing, for the purpose of production, a well, which starts as a vertical linear bore, which extends from the earth surface to a sub layer location above the oil or gas reservoir. This target is referred to as the kickoff point, and the extension bears off a curve to traverse the reservoir at the well’s entry point. Thereafter, the arch continues at an almost horizontal attitude tangent to the curve to remain in the reservoir partially or wholly till the required bottom hole location is attained. The mechanical purpose of horizontal drilling is to uncover significantly additional reservoir rocks to a well bore surface than attainable through drilling traditional vertical wells.